View HCPL-2503SDV_2568390.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

?005 fairchild semiconductor corporation 1 www.fairchildsemi.com single-channel: 6n135, 6n136 , hcpl-2503, hcpl-4502 dual-channel: hcpl-2530, hcpl-2531 rev. 1.0.5 single-channel: 6n135, 6n136 , hcpl-2503, hcpl-4502 dual-channel: hcpl-2530, hcpl-2531 high speed transistor optocouplers tm j uly 2006 single-channel: 6n135, 6n136, hcpl-2503, hcpl-4502 dual-channel: hcpl-2530, hcpl-2531 high speed transistor optocouplers features high speed?mbit/s superior cmr-10kv/? dual-channel hcpl-2530/hcpl-2531 double working voltage?80v rms ctr guaranteed 0?0? u .l. recognized (file # e90700) applications line receivers pulse transformer replacement output interface to cmos-lsttl-ttl wide bandwidth analog coupling description the hcpl-4502/hcpl-2503, 6n135/6 and hcpl-2530/ hcpl-2531 optocouplers consist of an algaas led opti- cally coupled to a high speed photodetector transistor. a separate connection for the bias of the photodiode improves the speed by several orders of magnitude over conventional phototransistor optocouplers by reducing the base-collector capacitance of the input transistor. an internal noise shield provides superior common mode rejection of 10kv/?. an improved package allows supe- r ior insulation permitting a 480v working voltage com- pared to industry standard of 220v. pa ck ag es c hematic 8 8 1 8 1 1 1 2 3 4 5 6 7 8 + _ v f1 v cc v 01 v 02 gnd v f2 _ + hcpl-2530/hcpl-2531 1 2 3 4 5 6 7 8 + _ v f v cc v b v o gnd n/c n/c 6n135, 6n136, hcpl-2503, hcpl-4502 pin 7 is not connected in pa rt number hcpl-4502
2 www.fairchildsemi.com single-channel: 6n135, 6n136 , hcpl-2503, hcpl-4502 dual-channel: hcpl-2530, hcpl-2531 rev. 1.0.5 single-channel: 6n135, 6n136 , hcpl-2503, hcpl-4502 dual-channel: hcpl-2530, hcpl-2531 high speed transistor optocouplers absolute maximum ratings (t a = 25? unless otherwise speci?d) notes: 1. derate linearly above 70? free-air temperature at a rate of 0.8ma/?. 2. derate linearly above 70? free-air temperature at a rate of 1.6ma/?. 3. derate linearly above 70? free-air temperature at a rate of 0.9 mw/?. 4. derate linearly above 70? free-air temperature at a rate of 2.0 mw/?. symbol parameter condition value units t stg storage temperature -55 to +125 ? t opr operating temperature -55 to +100 ? t sol lead solder temperature 260 for 10 sec ? emitter i f (avg) dc/average forward input current each channel (1) 25 ma i f (pk) p eak forward input current each channel (2) 50% duty cycle, 1ms p.w. 50 ma i f (trans) p eak transient input current each channel 1 ? p.w., 300pps 1.0 a v r reverse input voltage each channel 5v p d input power dissipation each channel 6n135/6n136 and hcpl-2503/4502 100 mw hcpl-2530/253 (3) 45 detector i o (avg) av erage output current each channel 8 ma i o (pk) p eak output current each channel 16 ma v ebr emitter-base reverse voltage 6n135, 6n136 and hcpl-2503 only 5 v v cc supply voltage -0.5 to 30 v v o output voltage -0.5 to 20 v i b base current 6n135, 6n136 and hcpl-2503 only 5 ma pd output power dissipation each channel 6n135, 6n136, hcpl-2503, hcpl-4502 (4) 100 mw hcpl-2530, hcpl-2531 35 mw
3 www.fairchildsemi.com single-channel: 6n135, 6n136 , hcpl-2503, hcpl-4502 dual-channel: hcpl-2530, hcpl-2531 rev. 1.0.5 single-channel: 6n135, 6n136 , hcpl-2503, hcpl-4502 dual-channel: hcpl-2530, hcpl-2531 high speed transistor optocouplers electrical characteristics (t a = 0 to 70? unless otherwise speci?d) individual component characteristics *all typicals at t a = 25? symbol p arameter t est conditions device min. t yp.* max. unit emitter v f input forward voltage i f = 16ma, t a =25? 1.45 1.7 v i f = 16ma 1.8 b vr input reverse breakdown v oltage i r = 10 ? 5.0 v ? v f / ? t a t emperature coef?ient of f orward voltage i f = 16ma -1.6 mv/? detector i oh logic high output current i f = 0ma, v o = v cc = 5.5v, t a =25? all 0.001 0.5 ? i f = 0ma, v o = v cc = 15v, t a =25? 6n135 6n136 hcpl-4502 hcpl-2503 0.005 1 i f = 0ma, v o = v cc = 15v all 50 i ccl logic low supply current i f = 16ma, v o = open, v cc = 15v 6n135 6n136 hcpl-4502 hcpl-2503 120 200 ? i f1 = i f2 = 16ma, v o = open, v cc = 15v hcpl-2530 hcpl-2531 200 400 i cch logic high supply current i f = 0ma, v o = open, v cc = 15v, t a =25? 6n135 6n136 hcpl-4502 hcpl-2503 1 ? i f = 0ma, v o = open, v cc = 15v 6n135 6n136 hcpl-4502 hcpl-2503 2 i f = 0ma, v o = open, v cc = 15v hcpl-2530 hcpl-2531 0.02 4
4 www.fairchildsemi.com single-channel: 6n135, 6n136 , hcpl-2503, hcpl-4502 dual-channel: hcpl-2530, hcpl-2531 rev. 1.0.5 single-channel: 6n135, 6n136 , hcpl-2503, hcpl-4502 dual-channel: hcpl-2530, hcpl-2531 high speed transistor optocouplers t ransfer characteristics (t a = 0 to 70? unless otherwise speci?d) *all typicals at t a = 25? note: 5. current transfer ratio is defined as a ratio of output collector current, i o , to the forward led input current, i f , times 100%. symbol p arameter t est conditions device min. t yp.* max. unit coupled ctr current transfer ratio (5) i f = 16ma, v o = 0.4 v, v cc = 4.5v, t a =25? 6n135 hcpl-2530 7 18 50 % 6n136 hcpl-4502 hcpl-2531 19 27 50 % hcpl-2503 12 27 % i f = 16ma, v cc = 4.5v v ol = 0.4v 6n135 5 21 % v ol = 0.5v hcpl-2530 v ol = 0.4v 6n136 hcpl-4502 15 30 % v ol = 0.5v hcpl-2531 v ol = 0.4v hcpl-2503 9 30 % v ol logic low output v oltage i f = 16ma, i o = 1.1ma, v cc = 4.5v, t a =25? 6n135 0.18 0.4 v hcpl-2530 0.18 0.5 i f = 16ma, i o = 3ma, v cc = 4.5v, t a =25? 6n136 hcpl-2503 0.25 0.4 hcpl-2531 0.25 0.5 i f = 16ma, i o = 0.8ma, v cc = 4.5v 6n135 hcpl-2530 0.5 i f = 16ma, i o = 2.4ma, v cc = 4.5v hcpl-4502 hcpl-2531 0.5
5 www.fairchildsemi.com single-channel: 6n135, 6n136 , hcpl-2503, hcpl-4502 dual-channel: hcpl-2530, hcpl-2531 rev. 1.0.5 single-channel: 6n135, 6n136 , hcpl-2503, hcpl-4502 dual-channel: hcpl-2530, hcpl-2531 high speed transistor optocouplers switching characteristics (t a = 0 to 70? unless otherwise speci?d., v cc = 5v) ** all typicals at t a = 25? notes: 6. the 4.1k ? load represents 1 lsttl unit load of 0.36ma and 6.1k ? pull-up resistor. 7. the 1.9k ? load represents 1 ttl unit load of 1.6ma and 5.6k ? pull-up resistor. 8. common mode transient immunity in logic high level is the maximum tolerable (positive) dv cm /dt on the leading edge of the common mode pulse signal v cm , to assure that the output will remain in a logic high state (i.e., v o > 2.0v). common mode transient immunity in logic low level is the maximum tolerable (negative) dv cm /dt on the trailing edge of the common mode pulse signal, v cm , to assure that the output will remain in a logic low state (i.e., v o < 0.8v). symbol parameter test conditions device min. typ.* max. unit t phl propagation delay time to logic low t a = 25?, r l = 4.1k ? , i f = 16ma (6) (fig. 7) 6n135 hcpl-2530 0.45 1.5 ? r l = 1.9k ? , i f = 16ma, t a = 25? (7) (fig. 7) 6n136 hcpl-4502 hcpl-2503 hcpl-2531 0.45 0.8 ? r l = 4.1k ? , i f = 16ma (6) (fig. 7) 6n135 hcpl-2530 2.0 ? r l = 1.9k ? , i f = 16ma (7) (fig. 7) 6n136 hcpl-4502 hcpl-2503 hcpl-2531 1.0 ? t plh propagation delay time to logic high t a = 25?, (r l = 4.1k ? , i f = 16ma (6) (fig. 7) 6n135 hcpl-2530 0.5 1.5 ? r l = 1.9k ? , i f = 16ma (7) (fig. 7) t a = 25? 6n136 hcpl-4502 hcpl-2503 hcpl-2531 0.3 0.8 ? r l = 4.1k ? , i f = 16ma (6) (fig. 7) 6n135 hcpl-2530 2.0 ? r l = 1.9k ? , i f = 16ma (7) (fig. 7) 6n136 hcpl-4502 hcpl-2503 hcpl-2531 1.0 ? |cm h | common mode tr ansient immunity at logic high i f = 0ma, v cm = 10v p-p ,, r l = 4.1k ? , t a = 25? (8) (fig. 8) 6n135 hcpl-2530 10,000 v/? i f = 0ma, v cm = 10v p-p , r l = 1.9k ? , t a = 25? (8) (fig. 8) 6n136 hcpl-4502 hcpl-2503 hcpl-2531 10,000 v/? |cm l | common mode tr ansient immunity at logic low i f = 16ma, v cm = 10 v p-p , r l = 4.1k ? , t a = 25? (8) (fig. 8) 6n135 hcpl-2530 10,000 v/? i f = 16ma, v cm = 10 v p-p , r l = 1.9k ? (8) (fig. 8) 6n136 hcpl-4502 hcpl-2503 hcpl-2531 10,000 v/?
6 www.fairchildsemi.com single-channel: 6n135, 6n136 , hcpl-2503, hcpl-4502 dual-channel: hcpl-2530, hcpl-2531 rev. 1.0.5 single-channel: 6n135, 6n136 , hcpl-2503, hcpl-4502 dual-channel: hcpl-2530, hcpl-2531 high speed transistor optocouplers isolation characteristics (t a = 0 to 70? unless otherwise speci?d) notes: 9. device is considered a two terminal device: pins 1, 2, 3 and 4 are shorted together and pins 5, 6, 7 and 8 are shorted together. 10. measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together. i symbol characteristics test conditions min typ** max unit i i-o input-output insulation leakage current relative humidity = 45%, t a = 25?, t = 5s, v i-o = 3000 vdc (9) 1.0 ? v iso withstand insulation test v oltage rh 50%, t a = 25?, i i-o 2 ?, t = 1 min. (9) 2500 v rms r i-o resistance (input to output) v i-o = 500vdc (9) 10 12 ? c i-o capacitance (input to output) f = 1 mhz (9) 0.6 pf hfe dc current gain i o = 3ma, v o = 5v (9) 150 i i-i input-input insulation leakage current rh 45%, v i-i = 500vdc (10) t = 5 s, (hcpl-2530/2531 only) 0.005 ? r i-i input-input resistance v i-i = 500 vdc (10) (hcpl-2530/2531 only) 10 11 ? c i-i input-input capacitance f = 1mhz) (10) (hcpl-2530/2531 only) 0.03 pf
7 www.fairchildsemi.com single-channel: 6n135, 6n136 , hcpl-2503, hcpl-4502 dual-channel: hcpl-2530, hcpl-2531 rev. 1.0.5 single-channel: 6n135, 6n136 , hcpl-2503, hcpl-4502 dual-channel: hcpl-2530, hcpl-2531 high speed transistor optocouplers fig. 1 normalized ctr vs. forward current i f - forward current (ma) 0.1 1 10 100 normalized ctr 0.0 0.2 0.4 0.6 0.8 1.0 1.2 fig. 2 normalized ctr vs. temperature t a - temperature ( c) -60 -40 -20 0 20 40 60 80 100 normalized ctr 0.0 0.2 0.4 0.6 0.8 1.0 1.2 fig. 3 output current vs. output voltage v o - output voltage (v) 02468101214161820 i o - output current (ma) 0 2 4 6 8 10 12 14 16 i f = 5 ma i f = 10 ma i f = 15 ma i f = 20 ma i f = 25 ma i f = 30 ma i f = 35 ma i f = 40 ma normalized to: i f = 16 ma v o = 0.4 v v cc = 5 v t a = 25 c normalized to: t a = 25 c i f = 16ma v cc = 5 v v o = 0.4 v fig. 4 logic high output current vs. temperature t a - temperature ( c) -60 -40 -20 0 20 40 60 80 100 i oh - logic high output current (na) 0.1 1 10 100 1000 fig. 5 propagation delay vs. temperature t a - temperature ( c) -60 -40 -20 0 20 40 60 80 100 t p - propagation delay (ns) 0 100 200 300 400 500 600 700 800 r l = 1.9 k (tphl) r = 4.1 k (tplh) l r l = 1.9 k (tplh) r l = 4.1 k (tplh) fig. 6 propagation delay vs. load resistance r l = load resistance (k ? ) 1 10 t p - propagation delay (ns) 100 1000 10000 i f - 16 ma (tphl) i f - 10 ma (tphl) i f - 10 ma (tplh) i f - 16 ma (tplh) t a = 25 c v cc = 5 v i f = 0 ma v cc = 5 v v o = 5 v i f = 16 ma v cc = 5 v v cc = 5 v t a = 25 c
8 www.fairchildsemi.com single-channel: 6n135, 6n136 , hcpl-2503, hcpl-4502 dual-channel: hcpl-2530, hcpl-2531 rev. 1.0.5 single-channel: 6n135, 6n136 , hcpl-2503, hcpl-4502 dual-channel: hcpl-2530, hcpl-2531 high speed transistor optocouplers pulse ge n cm v v ff b a +- +5 v o v - i f 3 4 + f v - 2 1 shield nois e 6 o 5 gnd 7 8 v b v cc v l r plh ol v v o 0 5 v 1.5 v f i 1. 5 v t phl t sw itch at a : i = 0 ma f sw itch at a : i = 16 ma f t r v o o v ol v 5 v 0 v 10% 10% 90% cm v 10 v 45 nois e 1 2 3 shie ld 8 7 6 +5 v o v v cc v 01 v 02 gnd v f1 - + f2 v - f i + 10% duty cycle i/f < 100 s f i monitor l r c = 1.5 f l pulse generator tr = 5n s z = 50 o ? gnd + 4 5 1 3 2 - f2 v v f1 - shield noise +5 v cc 8 v l v 6 02 v 7 r 01 v o v cm a b pulse ge n f i +- + 3 i monitor f 4 i/f < 100 s 10% d.c. tr = 5ns generator pulse z = 50 o + v f i ? f - 2 1 shield noise v o o 6 5 gnd 7 8 v b v l r cc v +5 v 0.1 f l c = 1.5 f test circuit for 6n135, 6n136, hcpl-2503 and hcpl- 4502 0.1 f test circuit for hcpl-2530 and hcpl-2531 test circuit for 6n135, 6n136, hcpl-2503 and hcpl-4502 test circuit for hcpl-2530 and hcpl- 2531 f t 0.1 f 0.1 f ff v m r m r 90 % fig. 8 common mode immunity test circuit fig. 7 switching time test circuit
9 www.fairchildsemi.com single-channel: 6n135, 6n136 , hcpl-2503, hcpl-4502 dual-channel: hcpl-2530, hcpl-2531 rev. 1.0.5 single-channel: 6n135, 6n136 , hcpl-2503, hcpl-4502 dual-channel: hcpl-2530, hcpl-2531 high speed transistor optocouplers pa ck ag e dimensions all dimensions are in inches (millimeters) through hole surface mount 0.4 lead spacing recommend pad layout for surface mount leadform lead coplanarity : 0.004 (0.10) max 0.270 (6.86) 0.250 (6.35) 0.390 (9.91) 0.370 (9.40) 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) typ 0.020 (0.51) min 0.070 (1.78) 0.045 (1.14) 0.300 (7.62) typ 0.405 (10.30) min 0.315 (8.00) min 0.045 [1.14] 32 1 4 567 8 0.016 (0.41) 0.008 (0.20) pin 1 id. 0.200 (5.08) 0.140 (3.55) 0.100 (2.54) typ 0.022 (0.56) 0.016 (0.41) 0.020 (0.51) min 0.390 (9.91) 0.370 (9.40) 0.270 (6.86) 0.250 (6.35) 3 0.070 (1.78) 0.045 (1.14) 2 41 56 7 8 0.300 (7.62) typ 0.154 (3.90) 0.120 (3.05) 0.016 (0.40) 0.008 (0.20) 15?max pin 1 id. seating plane 0.070 (1.78) 0.060 (1.52) 0.030 (0.76) 0.100 (2.54) 0.295 (7.49) 0.415 (10.54) 0.200 (5.08) 0.140 (3.55) 0.100 (2.54) typ 0.022 (0.56) 0.016 (0.41) 0.004 (0.10) min 0.390 (9.91) 0.370 (9.40) 0.270 (6.86) 0.250 (6.35) 3 0.070 (1.78) 0.045 (1.14) 2 41 56 7 8 0.400 (10.16) typ 0.154 (3.90) 0.120 (3.05) 0.016 (0.40) 0.008 (0.20) 0?to 15 pin 1 id. seating plane
10 www.fairchildsemi.com single-channel: 6n135, 6n136 , hcpl-2503, hcpl-4502 dual-channel: hcpl-2530, hcpl-2531 rev. 1.0.5 single-channel: 6n135, 6n136 , hcpl-2503, hcpl-4502 dual-channel: hcpl-2530, hcpl-2531 high speed transistor optocouplers ordering information marking information option example part number description s 6n135s surface mount lead bend sd 6n135sd surface mount; tape and reel w 6n135w 0.4" lead spacing v 6n135v vde0884 wv 6n135wv vde0884; 0.4 lead spacing sv 6n135sv vde0884; surface mount sdv 6n135sdv vde0884; surface mount; tape and reel 1 2 6 4 3 5 de?itions 1f airchild logo 2d e vice number 3 vde mark (note: only appears on parts ordered with vde option ? see order entry table) 4t wo digit year code, e.g., ?3 5t wo digit work week ranging from ?1 to ?3 6 assembly package code 2503 t1 yy xx v
11 www.fairchildsemi.com single-channel: 6n135, 6n136 , hcpl-2503, hcpl-4502 dual-channel: hcpl-2530, hcpl-2531 rev. 1.0.5 single-channel: 6n135, 6n136 , hcpl-2503, hcpl-4502 dual-channel: hcpl-2530, hcpl-2531 high speed transistor optocouplers carrier tape speci?ations re?w pro?e 0.30 0.05 4.0 0.1 4.0 0.1 1.55 0.05 1.6 0.1 1.75 0.10 12.0 0.1 10.30 0.20 13.2 0.2 0.1 max user direction of feed 4.90 0.20 16.0 0.3 7.5 0.1 10.30 0.20 ? peak reflow temperature: 225 c (package surface temperature) ? time of temperature higher than 183 c for 60?50 seconds ? one time soldering reflow is recommended 215 c, 10?0 s 225 c peak ti me (minute) 0 300 250 200 150 100 50 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 temperature (?) time above 183 c, 60?50 sec ramp up = 3 c/sec
12 www.fairchildsemi.com single-channel: 6n135, 6n136 , hcpl-2503, hcpl-4502 dual-channel: hcpl-2530, hcpl-2531 rev. 1.0.5 single-channel: 6n135, 6n136 , hcpl-2503, hcpl-4502 dual-channel: hcpl-2530, hcpl-2531 high speed transistor optocouplers rev. i20 trademarks t he following are registered and unregistered trademarks fairchild semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. disclaimer fa i rchild semiconductor reserves the right to make changes without further notice to any products herein to improve reliability, function, or design. fairchild does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under it s patent rights, nor the rights of others. these specifications do not expand the terms of fairchild? worldwide terms and conditions, specifically the warranty therein, which covers these products. life su pport policy fa irchild? products are not authorized for use as critical components in life support devices or systems without the express written approval of fairchild semiconductor corporation. as used herein: 1. life support devices or systems are devices or systems which, (a ) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in a ccordance with instructions for use provided in the labeling, can be r easonably expected to result in significant injury to the user. 2. a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. pr oduct status definitions definition of terms acex activearray bottomless bu ild it now coolfet cross volt dome ecos park e 2 cmos en signa fact fast fastr fps frfet fa ct quiet series gl obaloptoisolator gto hisec i 2 c i-lo im plieddisconnect in tellimax isoplanar littlefet microcoupler microfet micropak microwire msx msxpro ocx ocxpro optologic optoplanar pacman pop po wer247 po weredge po wersaver po wertrench qfet qs qt op t oelectronics quiet series rapidconfigure rapidconnect serdes sc alarpump silent switcher smart start spm stealth superfet supersot-3 supersot-6 supersot-8 sync fet tcm ti ny boost tinybuck tinypwm tinypower ti ny logic tinyopto tr utranslation uhc unifet ultrafet vcx wire ac ross the board. around the world. t he power franchise pr ogrammable active droop datash eet identification product status definition ad vance information formative or in design this data sheet contains the design specifications for product development. specifications may change in any manner without notice. pr eliminary first production this datasheet contains preliminary data, and supplementary data will be published at a later date. fairchild semiconductor reserves the right to make changes at any time without notice to improve design. no identification needed full production this datasheet contains final specifications. fairchild se mi c onductor reserves the right to make changes at any time without notice to improve design. ob solete not in production this datasheet contains specifications on a product that has been discontinued by fairchild semiconductor. the datasheet is printed for reference information only.

▲Up To Search▲

Price & Availability of HCPL-2503SDV

	To Download HCPL-2503SDV Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .